The Models Of Industrial Air Compressors

Industrial air compressors are used by many industries and manufacturers; some even depend on them. An industrial one is much more powerful than the type of air compressors that you would find around the regular household.

They are also much more expensive than their lightweight cousins. These air compressor system choices come in both gasoline models and electric models. Most industries use the gasoline models rather than the electric models, as the gas models reduce the utility costs.

Most industries choose to use the two-stage model of industrial air compressors for their tough, heavy duty tasks. The two stage system can store unused air for future use.

This type of compressor is also much more energy efficient and runs on a higher level of horsepower. More horsepower with these devices means that they work better and longer than the other models. They also break down far less often, which means that fewer hours of maintenance is needed on these units.

When purchasing any type of industrial air compressor, both safety and quality standards need to be considered. Most industries are required to purchase such compressors and compressor parts that are certified by the ASME, also know as the American Society of Mechanical Engineers. In the past few years there has been growing concerns about workplace safety.

This has prompted companies to be aware that they are purchasing high quality devices which have been certified. Many of the manufacturer companies out there are installing a safety valve that is used in case excess air pressure builds up in the unit.

If this happens, then the valve allows the air to be released automatically, which will decrease the pressure if there is a power overload. If the device does not have this safety measure, then it can explode.

Industrial air compressors are used mostly for industrial purposes, as they are the kings of the its world. These industrial compressors have much more power than their more compact counterparts and can be used for a wider variety of tasks.

While they are more heavy duty, they are also pricier, but again are not really appropriate for home use. Portable air compressors are more suitable for home use and can be moved about with more ease, allowing you to use it in more areas.

Mike Selvon has some great air compressors articles. Find out more tips on industrial air compressors at his resourceful site. We appreciate your feedback at our air compressor parts blog.

Industrial Ceiling Fans On Way of Increasing Productivity

For several decades now, industrial ceiling fans have been a necessity in many manufacturing and trade workplaces to supplement their existing cooling systems. Ceiling fans were actually conceptualized and designed by industrial workers who devised a way to somehow alleviate the oppressive heat of their work area. Back then, an air conditioning system is not yet discovered, and the mere thought of working in such stifling conditions makes us all grateful of the convenience of the technological advancements we enjoy today.

Subjecting your people under a rather uncomfortable working condition would significantly lessen the productivity of employees and can possibly result to some health hazards and complications that would be a nightmare to you as an employer who would want to maximize production of his entire labor force. Air conditioning systems can only do so much in cooling a large area, so if you would want to cut some considerable amount of energy consumption and to ensure that the whole area would be properly ventilated, you need to install some heavy-duty industrial ceiling fans in strategic areas. Humidity and moisture can also potentially damage some sensitive product components, especially in enclosed large buildings.

If you are contemplating on buying several industrial ceiling fans, it would be best to measure the entire area of the workplace so you will be able to have a fairly good estimate on the number of industrial ceiling fans you would need to install. You can choose to make a purchase directly to the manufacturing company and ask some really helpful advise as to what brand has the highest standard of quality. You would naturally want a bigger air movement in large working spaces, and ordinary ceiling fans would simply not do. You would need to buy specifically designed industrial ceiling fans for a more durable feature that is equipped with a large motor to better work even for long periods of time and under a less ideal condition.

Buying industrial ceiling fans is one of the most practical and inexpensive alternatives to improving the air circulation and ventilation of your workplace. Make sure to ask around and gather some relevant ideas and suggestions as to the installation of your industrial ceiling fans. By providing a more conducive working condition for your employees, you would also be maximizing your production workforce and improving every individual’s output. In all aspects, it is a generally good and sensible that you might want to seriously consider and look into the possibilities.

Find insightful and useful information about House Plans or Heating and Air Conditioning at ArticleZone.com.

Industrial Roofing and Commercial Roof Repair

Roof means the top of your commercial building or house. A building without a roof is nothing. And if the roof is elaborated, then it looks striking.

We make available industrial roofing. Industrial roofing is the requirement of the contemporary society. Sometime bad weather can damage your roof. In that case all your belongings, which are under the roof, can get spoiled. So taking preventative measures are necessary. The other situation can be that you are constructing new industrial building. In this case you again need our services, as we have best tailored solutions just for you. Making a new roof can be comparatively easier than process of commercial roof repair. Still we are expert in both constructing Industrial Roofing and repairing it too. .

Re roofing and metallic retrofit are the services which are catered to you if you intend to change the whole roof and give your commercial place a total new look. Waterproofing can also be done, if you have fear in mind that your area is a rainy area and rains can create destruction. We have provided services to government and private both sectors. As they both differ but we comprehend the differences and tackle them in a special way. Our staff members are our assets, which will co-operate with you to make a business perfect plan for your commercial place.

Weather is divergent at different places. So if you have a place where sun is visible all the time and shines too much brightly to offer you a plenty of heat then metallic coverage is not beneficial for you. We would use some other material for that, for instance it can be a concrete roof. Acrylic elastomeric is also not a bad option for the same kind of place but if your commercial building is situated, where rain falls like cats and dogs then you must go for waterproof roof material to prevent roof from leakage. Other wise metal or glass roofing can be a nice decorative roof for industrial roofing.

We have numberless pleased customers, who would love to share their experiences with you. We have testimonials with us, to prove our excellence in the region.

After giving us the contract your anxiety would take place of pleasure and you would have a endearing and sweet smile on your face. So we would love to uphill struggle for your making your face smiling.

For more information about Industrial Roofing and Commercial Roof Repair visit our website.

Koreas Set Date for Reopening Shuttered Industrial Park

North and South Korea have agreed to reopen a jointly-run industrial park just inside the North Korean border on a trial basis beginning next week.

The South’s Unification Ministry, in a statement early Wednesday, said negotiators agreed on September 16 as a start date for the trial run. The agreement was reached after marathon negotiations that went through the night.

The Kaesong industrial complex opened in 2004 as a symbol of cooperation between Seoul and Pyongyang. But the facilities, which employ 53,000 people, were shut down by the North in April. Pyongyang blamed the closure on rising tensions from joint U.S.-South Korean military maneuvers.

South Korean businesses use Kaesong to manufacture a variety of products with cheap North Korean labor. In turn, the industrial park serves to provide vital foreign currency to the impoverished North.

The South Korean statement said industrial operations will fully resume after the trial run is completed.

Last month, with tensions easing, the two Koreas also agreed to resume stalled talks on reuniting families forcefully separated six decades ago by the Korean War.

Industrial Roof Ventilator Fans

Deep mines, underwater tunnels, and other subterranean and submarine environments require elaborate mechanically operated systems for maintaining the air supply in a healthful condition. The lives of those working in, or traveling through, such areas depend upon a constant supply of fresh air; not only must the systems used be highly efficient, but there should be provision for emergencies in case of failure of the apparatus in operation. An outgrowth of studies of problems of ventilation is the development of methods of air conditioning heat pump is a reversible device that does mechanical work to extract heat from a cooler place and deliver heat to a warmer place. The heat delivered to the warmer place is, approximately, the sum of the original heat and the work done.

Proper ventilation requires that there be a movement or circulation of the air within the space and that the temperature and humidity be maintained within a range that allows adequate evaporation of perspiration from the skin. It was formerly believed that the discomfort, headache, and lethargy commonly associated with poor ventilation were caused entirely by the increase in the amount of carbon dioxide and the decrease in the oxygen content of the air. There is evidence to show, however, that the deleterious effects result largely from interference with the heat-regulating mechanism of the body. Lack of air currents and the increase in relative humidity and temperature (especially noticeable in crowded, poorly ventilated places) prevent normal evaporation of perspiration and loss of heat from the surface of the skin.

A simple roof ventilator is essentially an opening in the roof with a cover to keep out rain and to prevent winds from interfering with its functioning. Natural convection is an appreciable aid to ventilation in a large building only if it contains sources of large amounts of heat. A further useful adjunct is a fan fan, device for agitating air or gases or moving them from one location to another. Mechanical fans with revolving blades are used for ventilation, in manufacturing, in winnowing grain, to remove dust, cuttings, or other waste, or to provide draft for a fire. The addition of distribution ducts to the fan and a system for forcing air into the building provides greater efficiency. Outlets are designed to attain maximum mixing of air and to move large amounts of air at low velocity so that temperature layers are eliminated. Factories have special suction hoods and enclosures to draw away localized dust, fumes, and heat. Incoming air may be cleaned of dust by filters or electrostatic precipitators.

Natural ventilation depends on winds outside and convection currents inside a building. Winds raise air pressure slightly on the windward side of a building and lower it slightly on the lee side. The pressure difference promotes circulation into the building on the windward side and out of it on the lee side. Convection currents are caused by the sinking of colder and therefore heavier air, which displaces the warmer air. A building may have a roof ventilator to allow the rising warm air to escape. If there is an opening to the outside at the bottom of the building, fresh, cool air will be drawn in.

Such systems, unlike ordinary methods of ventilation, are independent of outdoor atmospheric conditions and can, therefore, maintain the indoor atmosphere at the most healthful temperature and humidity and can free the air of dust and other undesirable materials. They accomplish this, however, at a considerable cost in energy.

Roof ventilators are another option. They work in both summer and winter. In summer, roof ventilators reduce the build up of heat in the ceiling spaces, reducing the heat load on your insulation, meaning that the insulation works more effectively. In turn, you will save on your electricity bills as the air-conditioning systems will not have to work as hard. In winter, it reduces the amount of condensation that forms when warm, moist air from exhaust fans meets cold surfaces. Roof ventilators will also reduce the amount of corrosion and timber that occurs because of condensation. Roof ventilators should be installed where there is sarking underneath tiled roofs, when metal deck roofing is used, and when there is evidence of condensation in the roof spaces or ceilings.

A reliable ventilation system that can operate during a fire is both vital and essential. It prevents smoke logging, allows people to escape quickly, minimizes damages to property and contents and enables firemen to attack the fire without hindrance. Such power roof ventilators have the added advantage of providing normal day to day ventilation and in many cases can also be fitted with duct work for use in multi storey buildings.

For additional information please refer to

Susanna Terlitskaia Industrial Ventilating Engineer American Blowers Company

Choosing the correct industrial filters

Steam filtration is a vital part of any industrial application requiring steam as an energy source, whether it’s for driving mechanical processes, heating, or sterilization. Steam is an inherently dirty resource commonly contaminated with rust, scale and other particulates. The maintenance program for any steam-based system should always include a filtration component to protect each aspect of your system from contamination.

In industry steam is commonly used in processes for a variety of applications. Generally speaking, you can divide the industrial use of steam of its various forms into several categories, each of which exhibits specific process requirements:

Process steam for energy transfer for such applications as thermostatic and pressure controls, or energy for driving mechanical processes;

Culinary steam as used for food & beverage processing;

Superheated steam is typically found in mechanical applications that rely on its considerable energy, such as electrical power production and other mechanical processes, as well as antimicrobial applications;

Saturated steam, like superheated steam, drives mechanical processes and provides heat energy for thermostatic processes, such as cleaning and sterilization;

Dry saturated steam processes are routinely found in pharmaceutical and petrochemical applications, as well as food and beverage processing;

In-situ sterilization relies on steam to sterilize-in-place components of a sterile system without having to change or disassemble the system thereafter, thereby maintaining absolute sterility;

In-situ cleaning is similar to in-situ sterilization without the absolute purification requirement. No matter the application, there is great need for contaminant-free steam to protect downstream equipment or processes from scale, rust, and other particulates. One significant application is sterilization. By design sterile filters for compressed air or gas systems remove bacterial and viral contaminants from the compressed air source prior to application. To effectively perform this function, you must first sterilize the sterile filter and its element prior to use. Moreover, you must re-sterilize the filter every day, as well as each time you shut down the system whether for maintenance or otherwise. One effective way of sterilizing the filters in-situ is to use steam to ready the units. Introducing steam, however, also brings forth contaminants commonly found in steam sources, such as dirt, rust, and scale particulates; contaminants that will dramatically reduce the life and efficiency of the sterile filter element as its design serves to remove the aforementioned biological contaminants and not the larger coarse contaminants found in sourced steam. Steam filters will effectively remove those coarse particulates prior to the steam being introduced to the sterile filters for in-situ sterilization, thereby increasing their functional life.

Steam filter housings are necessarily manufactured of stainless steel to ensure housing integrity when operating in the rigorous environmental conditions of compressed steam sources. Lesser materials, such as aluminum or polycarbonate, are generally not suitable for steam environments. Steam filters are typically available with NPT, flange, sanitary, or stub-end connections with pipe sizes ranging from 1/2″ to 12″. Likewise, the steam filter elements are available in stainless steel combining stainless steel end caps with a porous sintered stainless steel filtration media. The sintered stainless steel element media is available in a variety of pore sizes, typically ranging from 1, 2, 5, 10, 15, 25, 40 and 50 microns, depending on your filtration requirements.

Key Factors for Sizing Filters for Your Application

When determining the proper steam filter size and its micron retention rating, you must collect specific details as they relate to your application:

Determine the maximum allowable pore size. Keep in mind that selecting a pore size smaller than required will reduce your steam filter’s element service life, as well as create a higher pressure drop. A larger pore size than required will effectively reduce the service life and efficiency of your sterile filter installed thereafter;

Steam flow rate of your system in either lb/hr or kg/hr;

Steam pressure as measured psi or bar;

Allowable pressure drop for a new/clean element as measured in psi or bar. For this specification, we recommend a pressure drop of no more than 1.0 psi or 0.07 bar, as a higher pressure drop will reduce the effective life of the steam filter element;

Nominal Pipe Size (NPS) for the inlet and discharge of the installed filter, as well as the connection type (i.e. NPT, flange, sanitary connection, or stub-end). Cleaning You Steam Filter Elements

Depending on contaminant type, you can safely and effectively clean your sintered stainless steel steam filter elements using a diluted hydrochloric acid solution, ultrasonic bath, water, or air. Typically, you will clean your installed steam filter element when the differential pressure reaches 15 psi or 1.0 bar. A steam filter element will have reached the end of its effective service life when the “cleaned” unit can only maintain a pressure drop that meets or exceeds 10 psi or 0.7 bar.

Whatever your system application or steam requirements, steam filters protect your equipment and downstream processes, as well as your final product in some cases, and are critical to maintain system viability and maximize performance at the lowest possible cost. Their function is invaluable, and properly selected, applied, and maintained will considerably extend the component life of downstream equipment, as well as protect your final product from unwanted contamination.

Secured Government tenders for industrial supplies

Industrial development is getting a hike everyday with more number of people interested in investment this growth is going to get more and more. Those who are interested in industrial supplies Tenders must be happy with the kind of investment coming up in the sector. With the number of investment work is getting up and more work stands for more tender the more you are selected in these tenders you are going to gain business and achieve success in business. Specialized industrial tenders like boiler & heater Tenders can be seen on separate head that will help you attending these tenders easily.

Those who are into the world boiler & heater Tenders are aware of the fact that there are both government and nongovernmental tenders available there. And obviously going for government tends is the safest options. The reasons behind this is,

“Payment security with government tenders are very high and the late that a government payment takes does not hurt as they are high profitable work also.

“If you have experience in industrial supplies Tenders then going for government tenders are easy as also you need to have proper papers for that as there the work is given on merit and not references.

“The credentials of government tenders are highly valued for sure and help you in getting further work.

“You can get the security deposit on time and in secured way for tenders with government sectors,

“Government works related to industrial sector are in much large number so chances for getting work are very high as also the work are really very large so this means continuous work for some days.

If you are thinking back again then please think as this is the most secured way for getting success in your business. Make sure that you visit the Latest tenders available online and then only you can get your desired success. Industrial supplies Tenders are available in all the important sites for visiting tenders and you can attend them very easily. Boiler & heater Tenders are easily available with them so please go for attending them with ease and make sure success in your business. With government companies the level of success is very high and you can get your desired level of business also so just start looking for government tenders today.

To get Secured Government tenders for industrial supplies tenders like boiler & heater Tenders visit tenders.khojle.in.

To get Secured Government tenders for industrial supplies tenders like boiler & heater Tenders visit tenders.khojle.in.

Industrial shelving boosts up manufacturing concerns

When we talk about industrialization it’s all about mechanization. Certainly it is these tools that boost up industrial management. Industrial management

is now a great subject that supports quality assurance as well. Now focus is only on how to maintain product safety, goods are manufactured on large scale

so its take time to be sold, so here is a problem how to safe things for a long time period, this thing give rise to industrial shelving, now the goods can

be kept and preserve for a long period of time without any fear of damage. So that management can easily place the things into warehouse.

Industrial racking increase storage capacity:

Most of the goods manufactured are in bulk form so the Industrial racking

where products are placed, are not like normal shelving which we used at home as well as used at commercial spots. These shelves are used to keep units

in stock and for the quick ship locations nationwide so easily placed in warehouse. Moreover on industrial shelves you can afford extra storage because these

are made of solid mettles. The shelves used in industry for storage are strong, solid, and simple in design and shape and available in simple colors.

Benefits of industrial shelving’s:

Industrial racking is one of the best storage equipment that the industry ever experienced. Most of the industrial shelving consists of palette racks,

storage cabinets and work bench. Well, for those who believe in complete storage systems, nothing could satisfy more than these shelving, as it does not

cover the overall space, it requires only minimum space and you can store tons of goods in just single industrial shelving. There are so many industrial

shelving available in custom design and standards in market and we can have big or small according to our planning and designing needs. It is the best tool

for moving the manufactured goods from one unit to another in the manufacturing unit. To enhance the storage capacity of your warehouse, you can find the Warehouse racking of your own choice, if you are intended to increase the storage

capacity or having less space, then exploit this storage trait and get the maximum benefit out of it.

Industrial shelves have removed all dangers faced by manufacturing concern:

Undoubtedly, industrial shelves have made the manufacturing units independent

in storage. Now with product management they can store their things for a long period of time, no breakage no damage, only the safety of manufactured goods

is assured. It is not only beneficial of manufacturing unit but also cost -effective for employers; this is how it becomes possible to produce goods on

large scale. There is more supply equal to demand, now there is no fear of recession, industries now on secure position, they can stable for a long time.

industries will never face the recession of 1930’s it is assured, and it is only possible due to the rise of warehouse racking which strengthen the product

storage process. Industrial shelving has bring out the manufacturing industry from the chaos of being disturbed due to the decrease in supply and increase

in demand, it is now the thing of old day, thanks to the modern technology which has made it the anecdote of old days. So that’s why manufacturing concern

are secure and there is no recession our generation will face as it happens in the past.